Sealey Adjustable Hook & Pin Wrench Set 11pc
Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish. Specially designed for use with slotted retaining rings. Hook and pin interchangeable hinged arms with three wrenches covering sizes 19-120mm. Pin sizes Ø4-8mm. Supplied in tough storage...
£85.49
Add to Wish List
Sealey Aluminium Loading Ramps 680kg Capacity per Pair
Manufactured from strong durable yet lightweight aluminium. Provides safe and easy ramp access for a variety of small vehicles. Suitable for loading/unloading quad bikes, ride-on lawnmowers or any other four wheeled vehicle up to a maximum of 680kg. Features extended...
£261.16
Add to Wish List
Sealey Bobbin Supports for RPS2
• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2....
£9.46
Add to Wish List
Sealey Brake Bleeder Set with Container
Composite collection bottle with magnetic locating pad. Supplied with tube and connectors.• Composite collection bottle with magnetic locating pad. • Capacity: 100ml. • Supplied with tube and connectors. • Model No. VS0201
£6.16
Add to Wish List
Sealey Carburettor Jet Tool 0.45-1.5mm 20pc
Precision machined carburettor jet cleaning and sizing kit. 20 Sizes ranging from 0.45-1.5mm in 0.05mm increments. For classic cars and larger jetted motorcycles. Folding design makes it easy for storage and small enough to carry. May also be used to...
£11.49
Add to Wish List
Sealey Carburettor Jet Tool 1.5-3mm 16pc
Precision machined carburettor jet cleaning and sizing kit. 16 Sizes ranging from 1.5-3mm in 0.1mm increments. For classic cars and larger jetted motorcycles. Folding design makes it easy for storage and small enough to carry. May also be used to...
£11.49
Add to Wish List
Sealey Carburettor Jet Wrench Set 6-8mm
Double end wrench suitable for use with 6 & 8mm round jets. Single end wrench for use on 6mm hex jets.• Double end wrench suitable for use with 6 & 8mm round jets. • Single end wrench for use on...
£8.40
Add to Wish List
Sealey Combination Cable Lock
Lightweight and convenient enough to carry in a pocket. Simple 3-digit combination retracting cable lock can be used in various daily situations to secure items and belongings. Uses 950mm long, Ø1.4mm cable to secure cycle helmet or bags to the...
£5.73
Add to Wish List
Sealey Deluxe Tyre Lever 375mm
Quality drop-forged and tempered steel with flat rounded tip. Moulded handle enables extra grip. Suitable for use with motorcycle, small agricultural or leisure tyres.• Quality drop-forged and tempered steel with flat rounded tip. • Moulded handle enables extra grip. •...
£6.96
Add to Wish List
Sealey Disc Brake Opening Tool
Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. Features moulded rubber handle enabling extra grip.• Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. •...
£18.96
Add to Wish List
Sealey Double End Long Reach Spark Plug Box Spanner 14/16mm with L-Bar
14/16mm Double end, traditional style, long reach spark plug box spanner with L-bar.• 14/16mm Double end, traditional style, long reach spark plug box spanner with L-bar. • Length: 180mm. • Model No. MS160
£2.36
Add to Wish List
Sealey Double End Long Reach Spark Plug Box Spanner 16/18mm with L-Bar
16/18mm Double end, traditional style, long reach spark plug box spanner with L-bar.• 16/18mm Double end, traditional style, long reach spark plug box spanner with L-bar. • Length: 205mm. • Model No. MS157
£3.14
Add to Wish List
Sealey Double End Long Reach Spark Plug Box Spanner 17/21mm with L-Bar
17/21mm Double end, traditional style, long reach spark plug box spanner with L-bar.• 17/21mm Double end, traditional style, long reach spark plug box spanner with L-bar. • Length: 150mm. • Model No. MS158
£3.44
Add to Wish List
Sealey Double End Long Reach Spark Plug Box Spanner 18/21mm with L-Bar
18/21mm Double end, traditional style, long reach spark plug box spanner with L-bar.• 18/21mm Double end, traditional style, long reach spark plug box spanner with L-bar. • Length: 175mm. • Model No. MS161
£2.75
Add to Wish List
Sealey Dual Carburettor Accessory Kit for MS029
Dual entry carburettor accessory kit for Model No. MS029. Enables MS029 to be fitted to a motorcycle with dual fuel inlets eliminating need to balance fuel tank in an awkward position. Includes 100mm hose, two 200mm hoses, four hose clamps...
£8.25
Add to Wish List
Sealey Engine Rebuild Stand - Multi Cylinder 75kg Capacity
Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.• Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports...
£112.28
Add to Wish List
Sealey Extension Side Ramps for MC680E 4pcs
All steel construction four piece ramp extension kit for Model No. MC680E motorcycle lift. The kit consists of two lift table extensions and two additional loading ramps. This converts motorcycle lift into a 2000mm x 1260mm 680kg mini tractor/quadbike or...
£315.14
Add to Wish List
Sealey Fork Cap Spanner 49 & 50mm
Combination fork cap spanner suitable for use on Kayaba, Showa and twin camber forks.• Combination fork cap spanner suitable for use on Kayaba, Showa and twin camber forks. • Model No. MS023
£19.83
Add to Wish List
Sealey Fork Seal Driver
Designed for easy installation of fork seals. Limits potential damage caused by other installation methods to the forks.• Designed for easy installation of fork seals. • Limits potential damage caused by other installation methods to the forks. • Minimum/Maximum Fork...
£55.77
Add to Wish List
Sealey Front Headstock Stand
• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to all mechanical components at the front of the bike is made easy. • Stand folds down for...
£95.00
Add to Wish List
Sealey Gudgeon Pin Remover - Motorcycle
Interchangeable piston adaptors, one for full skirt pistons that makes 360° contact with the cylinder, and a short skirt piston adaptor designed for use with slipper pistons. Suitable for use with most types and sizes of pistons. Supplied with four...
£43.16
Add to Wish List
Sealey Heavy-Duty Motorcycle Chain Splitter & Riveting Tool Set
Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links. Set is also ideal for use on horticultural and agricultural machinery. Includes tools designed for riveting and plate holder for connecting links accurately. Suitable for most...
£129.56
Add to Wish List
Sealey Hydraulic Motorcycle Lift 450kg Capacity
• All steel construction with foot operated, integral hydraulic pump and ram assembly. • Fitted with safety lock device to fix platform at three working heights of 405mm, 555mm and 660mm to prevent accidental lowering. • Suitable for use with...
£703.96
Add to Wish List
Sealey Locating Pin for RPS3S Ø25.5mm
Ø25.5mm Locating pin for Model No. RPS3S single sided rear support stand.• Ø25.5mm Locating pin for Model No. RPS3S single sided rear support stand. • Model No. RPS3S1
£9.46
Add to Wish List
Sealey Locating Pin for RPS3S Ø27.5mm
Ø27.5mm Locating pin for Model No. RPS3S single sided rear support stand.• Ø27.5mm Locating pin for Model No. RPS3S single sided rear support stand. • Model No. RPS3S2
£10.76
Add to Wish List
Sealey Locating Pin for RPS3S Ø28.5mm
Ø28.5mm Locating pin for Model No. RPS3S single sided rear support stand.• Ø28.5mm Locating pin for Model No. RPS3S single sided rear support stand. • Model No. RPS3S3
£12.48
Add to Wish List
Sealey Locating Pin for RPS3S Ø40.5mm
Ø40.5mm Locating pin for Model No. RPS3S single sided rear support stand.• Ø40.5mm Locating pin for Model No. RPS3S single sided rear support stand. • Model No. RPS3S4
£19.40
Add to Wish List
Sealey Micro Air Compressor with Work Light 12V
Compact design incorporating integral storage for air output hose. Features a work light and pressure gauge which reads up to 5.5bar(80psi). Powered by a 12V motor suitable for inflating tyres on motorcycles and cars. Supplied with vehicle accessory socket plug...
£16.17
Add to Wish List
Sealey Mini Tractor/Quad/Motorcycle Lift 680kg Capacity Air/Hydraulic
• All steel construction with heavy-duty hydraulic ram and air pump. • Supplied with separate, foot operated, hydraulic pump and reservoir unit. • Features two additional side platforms for extra width. • Ramp and platform made with chequer plate surface...
£1,735.72
Add to Wish List
Sealey Motorcycle & Bicycle Wheel Balancer & Truing Stand
• Professional dual purpose wheel balancer and truing stand. • Suitable for most motorcycle wheels. • Ideal for the workshop technician or competent DIY enthusiast. • Includes two cones and spindle for precise, easy alignment and balancing. • Enables the...
£138.20
Add to Wish List

Showing: 1 - 30 of 149

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!