Sealey Diffuser Pack of 5
• Suitable for use with Model No's PP25, PP25PLUS, PP35 & PP35PLUS• Model No. 120/802422
£117.46
Add to Wish List
Sealey Electrode Long Pack of 5
• Suitable for use with Model No's PP25, PP35 & PP35PLUS• Model No. 120/802428
£42.29
Add to Wish List
Sealey Electrode Short Low Power Pack of 5
• Suitable for use with Model No's PP25, PP25PLUS, PP35 & PP35PLUS• Model No. 120/802420
£29.33
Add to Wish List
Sealey Foot Pedal Power Control for TIG200HFACDC
Permits hands-free feathering of power output when used with Model No. TIG200HFACDC. Supplied with 4.5m cable.• Permits hands-free feathering of power output when used with Model No. TIG200HFACDC. • Supplied with 4.5m cable. • Model No. TIG200HFACDCF
£116.34
Add to Wish List
Sealey Inverter Plasma 40A with Compressor 230V
Features an integral compressor yet weighs only 16.8kg. Inverter power supply fitted with plasma cutter control circuitry. Inverter features a four LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on. Supplied with plasma...
£2,039.94
Add to Wish List
Sealey Inverter TIG Welding Torch 16mm²
Suitable for Sealey and other leading brands of inverter welders fitted with Dinse connectors.• Suitable for Sealey and other leading brands of inverter welders fitted with Dinse connectors. • Model No. TIG10S
£123.54
Add to Wish List
Sealey Inverter TIG Welding Torch 16mm² with Push-Button
Inverter TIG torch with two-pin connector and push-button for HF (High Frequency) start welding. Suitable for use with Model No. TIG160S. Supplied with three ceramic nozzles, three collets, collet holder/diffuser, short end cap, long end cap, two hose clamps, along...
£125.94
Add to Wish List
Sealey Inverter TIG Welding Torch 25mm² with Push-Button
Inverter TIG torch with two-pin connector and push-button for HF (High Frequency) start welding. Suitable for use with Model No's TIG180S and TIG200S. Supplied with three ceramic nozzles, three collets, collet holder/diffuser, short end cap, long end cap, two hose...
£137.94
Add to Wish List
Sealey Inverter Welder 140Amp 230V
Compact and lightweight unit weighing 5.5kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm. Features thermal cut-out protection. Portability allows...
£335.94
Add to Wish List
Sealey Inverter Welder 160Amp 230V
Compact and lightweight unit weighing 5.5kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4mm. Features thermal cut-out protection. Portability allows...
£383.94
Add to Wish List
Sealey Inverter Welder 180Amp 230V
Compact and lightweight unit weighing 6kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4mm. Features thermal cut-out protection. Portability allows...
£449.94
Add to Wish List
Sealey Inverter Welder 200Amp 230V
Compact and lightweight unit weighing 6kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø5mm. Features thermal cut-out protection. Portability allows...
£515.94
Add to Wish List
Sealey Inverter Welder MIG, TIG & MMA 200Amp
Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg. Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA...
£959.94
Add to Wish List
Sealey Inverter Welder MIG, TIG & MMA 200Amp with LCD Screen
• Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg. • Fully functional LCD front panel with easy to follow set up. • First, select type of welding, you will be advised the gas mixture and...
£1,059.64
Add to Wish List
Sealey MIG Welder Inverter 160Amp
• Manufactured with a pressed steel outer casing, these units are lighter than traditional models. • Inverter welders offer greater duty cycles and more power factor efficiency. • Fan cooled DC power supply. • Welds steel, stainless steel, copper, nickel,...
£411.92
Add to Wish List
Sealey MIG Welder Inverter 180Amp
• Manufactured with a pressed steel outer casing, these units are lighter than traditional models. • Inverter welders offer greater duty cycles and more power factor efficiency. • Fan cooled DC power supply. • Welds steel, stainless steel, copper, nickel,...
£465.28
Add to Wish List
Sealey Nozzle Long Pack of 5
• Suitable for use with Model No's PP25, PP35 & PP35PLUS• Model No. 120/802429
£39.27
Add to Wish List
Sealey Nozzle Short Low Power Pack of 5
• Suitable for use with Model No's PP25, PP25PLUS, PP35 & PP35PLUS• Model No. 120/802423
£29.33
Add to Wish List
Sealey Plasma Inverter 40Amp with Compressor
Features an integral compressor yet weighs only 18.5kg. Inverter power supply fitted with plasma cutter control circuitry. With built-in 4m plasma torch, earth cable and 4m gas hose. Features an LED display for the current output and dial adjustment from...
£1,559.94
Add to Wish List
Sealey TIG/MMA HF AC/DC Inverter Welder 200Amp 230V
Fan-cooled AC/DC power supply for pulse TIG and MMA welding applications. Suitable for welding aluminium, magnesium, stainless steel, steel, copper, nickel and titanium. TIG cycle includes post gas and current down-slope regulation. Features regulated high frequency (HF) push-button arc that...
£1,774.74
Add to Wish List
Sealey TIG/MMA Inverter Welder 130Amp 230V
Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Portability allows the welder to be taken to the job at hand making it ideal...
£419.94
Add to Wish List
Sealey TIG/MMA Inverter Welder 160Amp 230V
Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Portability allows the welder to be taken to the job at hand making it ideal...
£479.94
Add to Wish List

Showing: 1 - 30 of 36

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!